SMART PRND
Module -
Product Support Page
Last updated
4/24/2020
SMART PRND Module
Wiring
instructions:
(See
Function Table)
-
Black
wire connect to sensor ground, or chassis ground
-
Red
wire connect to +12 volt power from the ignition switch
-
Yellow
wire connect to PARK
-
Brown
wire connect to the REVERSE
-
W/Yellow
wire connect to NEUTRAL
-
W/Brown
wire connect to DRIVE
-
Blue
wire connect to 2ND
-
W/Blue
wire connect to LOW
-
Orange
wire outputs 0-5V analog voltage for interface to SMART
shift box, ECU, or data logger
Usage:
·
Wire as instructed, insulate any unused wires
·
Mount in a suitable location under the vehicle dash
·
Orange wire outputs:
Function Table |
Pin
Active to 12VDC |
Shift Selector Position |
Output VDC |
Yellow |
Park |
0.50
VDC |
Brown |
Reverse |
1.30
VDC |
W/Yellow |
Neutral |
2.10
VDC |
W/Brown |
Drive |
2.90
VDC |
Blue |
2nd |
3.70
VDC |
W/Blue |
Low |
4.50
VDC |
Confused? Contact us at
sales@forcedfour.com
|